There can be different kinds of problems that a water heater can develop. Often the heating elements fail in a water heater which is the first sign of a problem. If you have the right guidance you could opt to get it replaced, which will save you the cost of having to take it to a service and repair center for getting fixed. The following points below enumerate some common problems that often occur with water heaters and the solutions to the same.
An electric water heater might show several problems over time such as:
Most of these problems are resolved when you replace the heating element of the heater. The fix is usually a straightforward one and could be taken up as a DIY project at home. You can find replacement parts easily for standard heating element models in the market such as at hardware stores, home centers and dealers of appliance parts. The first step to take is to test the heating element and to ensure that it has a problem. You will then remove the part and replace it with a new one. Usually a water heater has a life span of ten to fifteen years. If the age of your water heater is old, it might be a good idea to replace it which will also help you save on energy costs.
Simple Water Heater Fixes
Often there might be a circuit breaker issue which might have gotten tripped. You need to press the reset button that is usually given on the upper thermostat. Once the circuit breaker is reset it could solve the problem. In case the tripping happens often, the heating element needs to be tested.
Replacing The Heating Elements
If you are about to replace the heating element you need to first turn off the power and then remove the metal covers. The circuit breaker to the main electric panel needs to be switched off before you commence work. Use a tester to know either the power supply has been disconnected or not. Usually a water heater has heating elements on the top and lower end that needs to be removed, but will not come off at the same time. You need to first test if the element has been burnt out; if it is so, the tester will not light. You also need to check for a shorted element/ the tester light that indicates a short will require you to replace the element. In order to remove the element you need to drain out the water from the tank. You would need to unscrew the existing element.
Ensure that you replace the element with a new one of the same wattage. This is usually mentioned on the old element; if the label cannot be found, you could also refer to the nameplate on the heater. For those who find the work cumbersome, calling in an expert plumber will get your water heater working in a few hours.
A Better Plumber